Interface IceDatagramSocket


public interface IceDatagramSocket
compatibility verification interface
  • Method Summary

    Modifier and Type
    Method
    Description
    void
    Binds this DatagramSocket to a specific address invalid input: '&' port.
    void
    Closes this datagram socket.
    void
    connect(InetAddress address, int port)
    Connects the socket to a remote address for this socket.
    void
    Connects this socket to a remote socket address (IP address + port number).
    void
    Disconnects the socket.
    boolean
    Tests if SO_BROADCAST is enabled.
    Returns the unique DatagramChannel object associated with this datagram socket, if any.
    Returns the address to which this socket is connected.
    Gets the local address to which the socket is bound.
    int
    Returns the port number on the local host to which this socket is bound.
    Returns the address of the endpoint this socket is bound to, or null if it is not bound yet.
    int
    Returns the port for this socket.
    int
    Get value of the SO_RCVBUF option for this DatagramSocket, that is the buffer size used by the platform for input on this DatagramSocket.
    Returns the address of the endpoint this socket is connected to, or null if it is unconnected.
    boolean
    Tests if SO_REUSEADDR is enabled.
    int
    Get value of the SO_SNDBUF option for this DatagramSocket, that is the buffer size used by the platform for output on this DatagramSocket.
    int
    Retrieve setting for SO_TIMEOUT.
    int
    Gets traffic class or type-of-service in the IP datagram header for packets sent from this DatagramSocket.
    boolean
    Returns the binding state of the socket.
    boolean
    Returns whether the socket is closed or not.
    boolean
    Returns the connection state of the socket.
    void
    Receives a datagram packet from this socket.
    void
    Sends a datagram packet from this socket.
    void
    setBroadcast(boolean on)
    Enable/disable SO_BROADCAST.
    void
    Sets the SO_RCVBUF option to the specified value for this DatagramSocket.
    void
    setReuseAddress(boolean on)
    Enable/disable the SO_REUSEADDR socket option.
    void
    Sets the SO_SNDBUF option to the specified value for this DatagramSocket.
    void
    setSoTimeout(int timeout)
    Enable/disable SO_TIMEOUT with the specified timeout, in milliseconds.
    void
    Sets traffic class or type-of-service octet in the IP datagram header for datagrams sent from this DatagramSocket.
  • Method Details

    • bind

      void bind(SocketAddress addr) throws SocketException
      Binds this DatagramSocket to a specific address invalid input: '&' port.

      If the address is null, then the system will pick up an ephemeral port and a valid local address to bind the socket.

      Parameters:
      addr - The address invalid input: '&' port to bind to.
      Throws:
      SocketException - if any error happens during the bind, or if the socket is already bound.
      SecurityException - if a security manager exists and its checkListen method doesn't allow the operation.
      IllegalArgumentException - if addr is a SocketAddress subclass not supported by this socket.
      Since:
      1.4
    • connect

      void connect(InetAddress address, int port)
      Connects the socket to a remote address for this socket. When a socket is connected to a remote address, packets may only be sent to or received from that address. By default a datagram socket is not connected.

      If the remote destination to which the socket is connected does not exist, or is otherwise unreachable, and if an ICMP destination unreachable packet has been received for that address, then a subsequent call to send or receive may throw a PortUnreachableException. Note, there is no guarantee that the exception will be thrown.

      A caller's permission to send and receive datagrams to a given host and port are checked at connect time. When a socket is connected, receive and send will not perform any security checks on incoming and outgoing packets, other than matching the packet's and the socket's address and port. On a send operation, if the packet's address is set and the packet's address and the socket's address do not match, an IllegalArgumentException will be thrown. A socket connected to a multicast address may only be used to send packets.

      Parameters:
      address - the remote address for the socket
      port - the remote port for the socket.
      Throws:
      IllegalArgumentException - if the address is null, or the port is out of range.
      SecurityException - if the caller is not allowed to send datagrams to and receive datagrams from the address and port.
      See Also:
    • connect

      void connect(SocketAddress addr) throws SocketException
      Connects this socket to a remote socket address (IP address + port number).

      Parameters:
      addr - The remote address.
      Throws:
      SocketException - if the connect fails
      IllegalArgumentException - if addr is null or addr is a SocketAddress subclass not supported by this socket
      Since:
      1.4
      See Also:
    • disconnect

      void disconnect()
      Disconnects the socket. This does nothing if the socket is not connected.
      See Also:
    • isBound

      boolean isBound()
      Returns the binding state of the socket.
      Returns:
      true if the socket succesfuly bound to an address
      Since:
      1.4
    • isConnected

      boolean isConnected()
      Returns the connection state of the socket.
      Returns:
      true if the socket succesfuly connected to a server
      Since:
      1.4
    • getInetAddress

      InetAddress getInetAddress()
      Returns the address to which this socket is connected. Returns null if the socket is not connected.
      Returns:
      the address to which this socket is connected.
    • getPort

      int getPort()
      Returns the port for this socket. Returns -1 if the socket is not connected.
      Returns:
      the port to which this socket is connected.
    • getRemoteSocketAddress

      SocketAddress getRemoteSocketAddress()
      Returns the address of the endpoint this socket is connected to, or null if it is unconnected.
      Returns:
      a SocketAddress representing the remote endpoint of this socket, or null if it is not connected yet.
      Since:
      1.4
      See Also:
    • getLocalSocketAddress

      SocketAddress getLocalSocketAddress()
      Returns the address of the endpoint this socket is bound to, or null if it is not bound yet.
      Returns:
      a SocketAddress representing the local endpoint of this socket, or null if it is not bound yet.
      Since:
      1.4
      See Also:
    • send

      void send(DatagramPacket p) throws IOException
      Sends a datagram packet from this socket. The DatagramPacket includes information indicating the data to be sent, its length, the IP address of the remote host, and the port number on the remote host.

      If there is a security manager, and the socket is not currently connected to a remote address, this method first performs some security checks. First, if p.getAddress().isMulticastAddress() is true, this method calls the security manager's checkMulticast method with p.getAddress() as its argument. If the evaluation of that expression is false, this method instead calls the security manager's checkConnect method with arguments p.getAddress().getHostAddress() and p.getPort() . Each call to a security manager method could result in a SecurityException if the operation is not allowed.

      Parameters:
      p - the DatagramPacket to be sent.
      Throws:
      IOException - if an I/O error occurs.
      SecurityException - if a security manager exists and its checkMulticast or checkConnect method doesn't allow the send.
      PortUnreachableException - may be thrown if the socket is connected to a currently unreachable destination. Note, there is no guarantee that the exception will be thrown.
      IllegalBlockingModeException - if this socket has an associated channel, and the channel is in non-blocking mode.
      See Also:
    • receive

      void receive(DatagramPacket p) throws IOException
      Receives a datagram packet from this socket. When this method returns, the DatagramPacket's buffer is filled with the data received. The datagram packet also contains the sender's IP address, and the port number on the sender's machine.

      This method blocks until a datagram is received. The length field of the datagram packet object contains the length of the received message. If the message is longer than the packet's length, the message is truncated.

      If there is a security manager, a packet cannot be received if the security manager's checkAccept method does not allow it.

      Parameters:
      p - the DatagramPacket into which to place the incoming data.
      Throws:
      IOException - if an I/O error occurs.
      SocketTimeoutException - if setSoTimeout was previously called and the timeout has expired.
      PortUnreachableException - may be thrown if the socket is connected to a currently unreachable destination. Note, there is no guarantee that the exception will be thrown.
      IllegalBlockingModeException - if this socket has an associated channel, and the channel is in non-blocking mode.
      See Also:
    • getLocalAddress

      InetAddress getLocalAddress()
      Gets the local address to which the socket is bound.

      If there is a security manager, its checkConnect method is first called with the host address and -1 as its arguments to see if the operation is allowed.

      Returns:
      the local address to which the socket is bound, or an InetAddress representing any local address if either the socket is not bound, or the security manager checkConnect method does not allow the operation
      Since:
      1.1
      See Also:
    • getLocalPort

      int getLocalPort()
      Returns the port number on the local host to which this socket is bound.
      Returns:
      the port number on the local host to which this socket is bound.
    • setSoTimeout

      void setSoTimeout(int timeout) throws SocketException
      Enable/disable SO_TIMEOUT with the specified timeout, in milliseconds. With this option set to a non-zero timeout, a call to receive() for this DatagramSocket will block for only this amount of time. If the timeout expires, a java.net.SocketTimeoutException is raised, though the DatagramSocket is still valid. The option must be enabled prior to entering the blocking operation to have effect. The timeout must be > 0. A timeout of zero is interpreted as an infinite timeout.
      Parameters:
      timeout - the specified timeout in milliseconds.
      Throws:
      SocketException - if there is an error in the underlying protocol, such as an UDP error.
      Since:
      JDK1.1
      See Also:
    • getSoTimeout

      int getSoTimeout() throws SocketException
      Retrieve setting for SO_TIMEOUT. 0 returns implies that the option is disabled (i.e., timeout of infinity).
      Returns:
      the setting for SO_TIMEOUT
      Throws:
      SocketException - if there is an error in the underlying protocol, such as an UDP error.
      Since:
      JDK1.1
      See Also:
    • setSendBufferSize

      void setSendBufferSize(int size) throws SocketException
      Sets the SO_SNDBUF option to the specified value for this DatagramSocket. The SO_SNDBUF option is used by the network implementation as a hint to size the underlying network I/O buffers. The SO_SNDBUF setting may also be used by the network implementation to determine the maximum size of the packet that can be sent on this socket.

      As SO_SNDBUF is a hint, applications that want to verify what size the buffer is should call getSendBufferSize().

      Increasing the buffer size may allow multiple outgoing packets to be queued by the network implementation when the send rate is high.

      Note: If send(DatagramPacket) is used to send a DatagramPacket that is larger than the setting of SO_SNDBUF then it is implementation specific if the packet is sent or discarded.

      Parameters:
      size - the size to which to set the send buffer size. This value must be greater than 0.
      Throws:
      SocketException - if there is an error in the underlying protocol, such as an UDP error.
      IllegalArgumentException - if the value is 0 or is negative.
      See Also:
    • getSendBufferSize

      int getSendBufferSize() throws SocketException
      Get value of the SO_SNDBUF option for this DatagramSocket, that is the buffer size used by the platform for output on this DatagramSocket.
      Returns:
      the value of the SO_SNDBUF option for this DatagramSocket
      Throws:
      SocketException - if there is an error in the underlying protocol, such as an UDP error.
      See Also:
    • setReceiveBufferSize

      void setReceiveBufferSize(int size) throws SocketException
      Sets the SO_RCVBUF option to the specified value for this DatagramSocket. The SO_RCVBUF option is used by the the network implementation as a hint to size the underlying network I/O buffers. The SO_RCVBUF setting may also be used by the network implementation to determine the maximum size of the packet that can be received on this socket.

      Because SO_RCVBUF is a hint, applications that want to verify what size the buffers were set to should call getReceiveBufferSize().

      Increasing SO_RCVBUF may allow the network implementation to buffer multiple packets when packets arrive faster than are being received using receive(DatagramPacket).

      Note: It is implementation specific if a packet larger than SO_RCVBUF can be received.

      Parameters:
      size - the size to which to set the receive buffer size. This value must be greater than 0.
      Throws:
      SocketException - if there is an error in the underlying protocol, such as an UDP error.
      IllegalArgumentException - if the value is 0 or is negative.
      See Also:
    • getReceiveBufferSize

      int getReceiveBufferSize() throws SocketException
      Get value of the SO_RCVBUF option for this DatagramSocket, that is the buffer size used by the platform for input on this DatagramSocket.
      Returns:
      the value of the SO_RCVBUF option for this DatagramSocket
      Throws:
      SocketException - if there is an error in the underlying protocol, such as an UDP error.
      See Also:
    • setReuseAddress

      void setReuseAddress(boolean on) throws SocketException
      Enable/disable the SO_REUSEADDR socket option.

      For UDP sockets it may be necessary to bind more than one socket to the same socket address. This is typically for the purpose of receiving multicast packets (See MulticastSocket). The SO_REUSEADDR socket option allows multiple sockets to be bound to the same socket address if the SO_REUSEADDR socket option is enabled prior to binding the socket using bind(SocketAddress).

      Note: This functionality is not supported by all existing platforms, so it is implementation specific whether this option will be ignored or not. However, if it is not supported then getReuseAddress() will always return false.

      When a DatagramSocket is created the initial setting of SO_REUSEADDR is disabled.

      The behaviour when SO_REUSEADDR is enabled or disabled after a socket is bound (See isBound()) is not defined.

      Parameters:
      on - whether to enable or disable the
      Throws:
      SocketException - if an error occurs enabling or disabling the SO_RESUEADDR socket option, or the socket is closed.
      Since:
      1.4
      See Also:
    • getReuseAddress

      boolean getReuseAddress() throws SocketException
      Tests if SO_REUSEADDR is enabled.
      Returns:
      a boolean indicating whether or not SO_REUSEADDR is enabled.
      Throws:
      SocketException - if there is an error in the underlying protocol, such as an UDP error.
      Since:
      1.4
      See Also:
    • setBroadcast

      void setBroadcast(boolean on) throws SocketException
      Enable/disable SO_BROADCAST.
      Parameters:
      on - whether or not to have broadcast turned on.
      Throws:
      SocketException - if there is an error in the underlying protocol, such as an UDP error.
      Since:
      1.4
      See Also:
    • getBroadcast

      boolean getBroadcast() throws SocketException
      Tests if SO_BROADCAST is enabled.
      Returns:
      a boolean indicating whether or not SO_BROADCAST is enabled.
      Throws:
      SocketException - if there is an error in the underlying protocol, such as an UDP error.
      Since:
      1.4
      See Also:
    • setTrafficClass

      void setTrafficClass(int tc) throws SocketException
      Sets traffic class or type-of-service octet in the IP datagram header for datagrams sent from this DatagramSocket. As the underlying network implementation may ignore this value applications should consider it a hint.

      The tc must be in the range 0 invalid input: '<'= tc invalid input: '<'= 255 or an IllegalArgumentException will be thrown.

      Notes:

      for Internet Protocol v4 the value consists of an octet with precedence and TOS fields as detailed in RFC 1349. The TOS field is bitset created by bitwise-or'ing values such the following :-

      • IPTOS_LOWCOST (0x02)
      • IPTOS_RELIABILITY (0x04)
      • IPTOS_THROUGHPUT (0x08)
      • IPTOS_LOWDELAY (0x10)
      The last low order bit is always ignored as this corresponds to the MBZ (must be zero) bit.

      Setting bits in the precedence field may result in a SocketException indicating that the operation is not permitted.

      for Internet Protocol v6 tc is the value that would be placed into the sin6_flowinfo field of the IP header.

      Parameters:
      tc - an int value for the bitset.
      Throws:
      SocketException - if there is an error setting the traffic class or type-of-service
      Since:
      1.4
      See Also:
    • getTrafficClass

      int getTrafficClass() throws SocketException
      Gets traffic class or type-of-service in the IP datagram header for packets sent from this DatagramSocket.

      As the underlying network implementation may ignore the traffic class or type-of-service set using setTrafficClass(int) this method may return a different value than was previously set using the setTrafficClass(int) method on this DatagramSocket.

      Returns:
      the traffic class or type-of-service already set
      Throws:
      SocketException - if there is an error obtaining the traffic class or type-of-service value.
      Since:
      1.4
      See Also:
    • close

      void close()
      Closes this datagram socket.

      Any thread currently blocked in receive(java.net.DatagramPacket) upon this socket will throw a SocketException.

      If this socket has an associated channel then the channel is closed as well. revised 1.4 spec JSR-51

    • isClosed

      boolean isClosed()
      Returns whether the socket is closed or not.
      Returns:
      true if the socket has been closed
      Since:
      1.4
    • getChannel

      DatagramChannel getChannel()
      Returns the unique DatagramChannel object associated with this datagram socket, if any.

      A datagram socket will have a channel if, and only if, the channel itself was created via the DatagramChannel.open method.

      Returns:
      the datagram channel associated with this datagram socket, or null if this socket was not created for a channel
      Since:
      1.4 spec JSR-51